UAD Powered Plug-Ins Manual - 260 - Chapter 28: Precision Buss Compressor
CHAPTER 28
Precision Buss Compressor
Overview
The Precision Buss Compressor is a dual-VCA-type dynamic processor that
yields modern, transparent gain reduction characteristics. It is specifically
designed to “glue” mix elements together for that cohesive and polished
sound typical of master section console compressors. A flexible and intuitive
tool, the Precision Buss Compressor is intended primarily for controlling the
final output of your mix, but can be usefully applied to a variety of sources
from drum busses or overheads to vocal groups, or even as a channel
compressor on individual track inserts.
The Precision Buss Compressor’s control set features Threshold, Ratio, Attack
and Release, with all parameters specifically tailored to buss compressor
usage. The Release control includes a multi-stage Auto Release also designed
for a wide variety of program material. Input and Output Gain control is
offered with metering for input, output and gain reduction. A high pass Filter
is offered for the internal control signal sidechain to reduce the sensitivity of
the compression to lower frequencies while retaining them in the output sig-
nal. An automatic Fade feature is included, which allows the user to set a cus-
tom fade-out or fade-in of the mix between 1 and 60 seconds long. Rounding
out the feature set is a Mix control that allows the user to achieve “parallel”
style dynamics control, without the need for a second buss or channel.
To Next Page
Loading...
Need help?
General
