EasyManua.ls Logo

Universal Audio Ampex ATR-102 - Chapter 21. Moog Multimode Filter; Overview

Universal Audio Ampex ATR-102
428 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
UAD Powered Plug-Ins Manual - 200 - Chapter 21: Moog Multimode Filter
CHAPTER 21
Moog Multimode Filter
Overview
If UA were able to conceive a product with Moog, what would it be? The
answer is revealed in the new UAD Moog Multimode Filter, which delivers the
first truly analog-sounding VCF (voltage controlled filter) emulation made for
mixing, performing, creating, or destroying. The Moog Multimode Filter is a
‘digital-only’ tabletop filter set that combines the best of Bob Moog’s classic
designs with select features from his final Voyager instrument. UA modeled
the analog behavior of the historical 4-pole ladder filter conceived by the
world’s most recognizable electronic instrument maker right down to the
self-oscillation, saturation and non-linearities of its analog counterpart. As the
name suggests, the heart of the Moog Multimode Filter is the switchable Low-
pass, Highpass and Bandpass filter that allows Moog’s signature self-oscilla-
tion and extreme resonance in any of the three modes, bringing a new level
of sophistication to Moog filter designs of the past.
The UAD Moog Filter algorithm uses a special filter structure that was created
especially to eliminate “digital” artifacts for time-varying filters. An expensive
DSP technique was used to calculate the response of the nonlinear feedback
loop surrounding the saturation and filter elements.
Warning: Like most resonant filters, UAD Moog Filter has the potential to
create unpredictable sonic results that can result in unexpected jumps in out-
put amplitude. Depending on the source material, input levels, and parameter
values, the filter output can suddenly get extremely loud, with the potential to
damage speakers and/or hearing. This condition is particularly susceptible
when the simultaneous conditions of high gain, low filter cutoff, and high res-
onance values are applied, and/or when the LFO sweeps into these condi-
tions. Use caution and/or low monitoring levels when dialing in extreme
parameter values to avoid speaker and/or hearing damage!

Table of Contents

Related product manuals