UAD Powered Plug-Ins Manual - 216 - Chapter 22: MXR Flanger/Doubler
MXR Flanger/Doubler Latency
This plug-in uses an internal upsampling technique. The upsampling results in
a slightly larger latency than most other UAD plug-ins. See Chapter 9 “UAD
Delay Compensation” in the UAD System Manual for more information.
Note: Compensating for additional latency is not required if the host appli-
cation supports full plug-in delay compensation throughout the signal path, or
when it is used only on the outputs.
The MXR Model 126 Flanger/Doubler hardware unit
To Next Page
Loading...
