UAD Powered Plug-Ins Manual - 291 - Chapter 33: Precision K-Stereo Ambience Recovery
Mid/Side Controls
The Mid/Side controls allow for level adjustments to the middle (center) and
side portions of signals within a stereo field. Mid/Side adjustments can be
made when ambience recovery is active or disabled. Note that the ambience
recovery process does not use or require mid/side techniques to achieve am-
bience recovery or enhancement.
Note: The Mid/Side controls are disabled when the plug-in is used in a
mono-in/mono-out configuration.
Refer to Figure 90 below for the controls in this section.
M/S Gain
Enable
This switch enables/disables the Mid Gain and Side Gain controls.
Mid Gain Mid Gain adjusts the level of signals in the middle of a stereo signal. The
available range is -12 dB to +6 dB, available in 0.1 dB steps. To quickly re-
turn to the 0 dB setting, click the MID text label.
Side Gain Side Gain adjusts the level of signals at the sides of a stereo signal. The avail-
able range is -12 dB to +6 dB, available in 0.1 dB steps. To quickly return to
the 0 dB setting, click the SIDE text label.
Figure 90. The Mid/Side controls
To Next Page
Loading...
