Universal Robots E Series Service Manual

All rights reserved 12 Service Manual e-Series (EN) 1.1.8
NOTICE
Hold the ESD-sensitive part by its edges.
Do not touch its pins or hold directly on any exposed prints.
NOTICE
First place the OLD part in the spare ESD bag, then take out the NEW part of the ESD
bag.
NOTICE
Do not place the ESD-sensitive part on nonconductive material or on metal
tables/surfaces.
If you must put down the ESD-sensitive part for any reason, then first place it into the
ESD bag.

Universal Robots E Series Specifications

General

Brand	Universal Robots
Model	E Series
Category	Robotics
Language	English