UPPAbaby MESA V2 User Manual

18
VEHICLE COMPATIBILITY – Choosing a Vehicle Seating Location
The safest seating position is one that works best
for your specific car seat, family and vehicle. When
determining whether the MESA V2 rear-facing car
seat can be used with lower anchors in the rear center
seating position, it is critical that you refer to your
vehicle owner’s instruction book. If the MESA V2 does
not install best in the rear center seating location, it
is recommended to move to one of the outboard
seating positions.
Before installing this child restraint you MUST
determine the method of installation and the best
vehicle seating position for that method. This child
restraint can be installed either using LATCH or the
VEHICLE SEAT BELT.
ALWAYS park on a level
surface when installing a
Child Restraint.
Please read the following information before installing this Child Restraint!
Vehicle Seat Belt
Vehicle Seat Belt
Retractor
Lower Anchors

UPPAbaby MESA V2 Specifications

General

Product Type	Infant Car Seat
Weight Capacity	4-35 lbs
Height Capacity	Up to 32 inches
Carrier Weight	9.9 lbs
Base	Included
Side Impact Protection	Yes
Adjustable Headrest	Yes
Height	24 inches
Width	17 inches
Safety Standards	FMVSS 213
Harness	5-point harness
Fabric	Merino wool
Base Installation	SmartSecure System
Stroller Compatibility	UPPAbaby VISTA and CRUZ strollers
Materials	Merino wool