UPPAbaby MESA V2 User Manual

42
CARRIER INSTALLATION WITH VEHICLE SEAT BELT
Lap/Shoulder Belt Preferred Routing Method
1 Route the lap portion of the seat
belt through both lap belt guides on
the carrier and buckle the seat belt.
2 Route belt around the seat back
through the rear belt guide.
If shoulder belt does not route around the back of the MESA V2 carrier, follow
LAP/SHOULDER BELT OPTIONAL ROUTING METHOD PAGE 44
1 2
3
WARNING! Vehicle seat belt must lock,
otherwise locking clip must be used. See
page 47 for instructions.

UPPAbaby MESA V2 Specifications

General

Product Type	Infant Car Seat
Weight Capacity	4-35 lbs
Height Capacity	Up to 32 inches
Carrier Weight	9.9 lbs
Base	Included
Side Impact Protection	Yes
Adjustable Headrest	Yes
Height	24 inches
Width	17 inches
Safety Standards	FMVSS 213
Harness	5-point harness
Fabric	Merino wool
Base Installation	SmartSecure System
Stroller Compatibility	UPPAbaby VISTA and CRUZ strollers
Materials	Merino wool