32
BASE INSTALLATION WITH VEHICLE SEAT BELT
Lap/Shoulder Belt Routing Method
LEV
EL WHEN
NO RED
VIS
IBLE
LEV
E
L
WH
E
N
N
O
R
ED
V
IS
IBLE
2
3
1 Open lock-o.
2 Route the vehicle belt through the vehicle belt path
while guiding the lap portion of the belt as close as possi-
ble to the top of the lock-o where the door hinges.
Buckle the vehicle belt.
3 Hold shoulder portion of belt above base. With one
hand, push down base in the direction of the seat bight
(crease of seat) and hold firm as you pull shoulder belt.
LEVEL WHEN
NO RED
VISIBLE
1
To Next Page
Loading...
