UPPAbaby MESA V2 - Lap Belt Only Routing

46
4
CARRIER INSTALLATION WITH VEHICLE SEAT BELT
Lap Belt Only Routing Method
1 Route the lap belt through both guides on the carrier and buckle the seat belt.
2 Push the carrier into the vehicle seat bight (crease of the seat) and gently apply
pressure from behind the carrier into the vehicle seat back. At the same time,
pull on the looser portion of the lap belt closest to the buckle and hold tightly.
NOTE: Be mindful of canopy.
3 Rotate carry handle forward to the (4th) rebound position when in use.
NOTE: Check that the carrier is still properly leveled.
REVIEW SAFETY CHECK
ON PAGE 48.
ALL STEPS MUST BE ACHIEVED.
1 2 3