UPPAbaby MESA V2 User Manual

19
VEHICLE COMPATIBILITY – Determining Best Installation Method
At this point take out your Vehicle owner's instruction book. You will need this to look up different features in
your vehicle that might affect the installation.
WARNING! NEVER place a rear-facing only child restraint in front of an
active airbag.
Lower Anchor
(pg 24)
Lap/Shoulder Belt
(pg 30)
Lap Belt Only (pg 30)
BASE INSTALLATION CARRIER INSTALLATION
NOTE: The carry handle must be
locked in the (4th) rebound position
when in use.
Lap/Shoulder Belt
Optional Routing
(pg 40)
Lap/Shoulder Belt
Preferred Routing
(pg 40)
Lap Belt Only
Routing
(pg 40)

UPPAbaby MESA V2 Specifications

General

Product Type	Infant Car Seat
Weight Capacity	4-35 lbs
Height Capacity	Up to 32 inches
Carrier Weight	9.9 lbs
Base	Included
Side Impact Protection	Yes
Adjustable Headrest	Yes
Height	24 inches
Width	17 inches
Safety Standards	FMVSS 213
Harness	5-point harness
Fabric	Merino wool
Base Installation	SmartSecure System
Stroller Compatibility	UPPAbaby VISTA and CRUZ strollers
Materials	Merino wool