UPPAbaby MESA V2 User Manual

21
If you do not use lower anchor to
properly secure the child restraint
you must use the VEHICLE SEAT
BELT SYSTEM. Seat belt systems
vary by make, model, and year
of your vehicle. There are some
vehicle belts that will NOT work
with this child restraint or that
require additional steps.
CHECK YOUR VEHICLE OWNER’S
INSTRUCTION BOOK
for information regarding your
vehicle seat belt system(s).
This child restraint is compatible
with most vehicle seat belt systems.
VEHICLE COMPATIBILITY
Overview of Vehicle Seat Belt Systems
SEWN-ON LATCH PLATE
VEHICLE SEAT (LAP/SHOULDER BELT) VEHICLE SEAT (LAP BELT ONLY)
SLIDING LATCH PLATE
LOCKING LATCH PLATE LOCKING LATCH PLATE
LATCH PLATE
BUCKLE
WEBBING
LATCH PLATE
BUCKLE

UPPAbaby MESA V2 Specifications

General

Product Type	Infant Car Seat
Weight Capacity	4-35 lbs
Height Capacity	Up to 32 inches
Carrier Weight	9.9 lbs
Base	Included
Side Impact Protection	Yes
Adjustable Headrest	Yes
Height	24 inches
Width	17 inches
Safety Standards	FMVSS 213
Harness	5-point harness
Fabric	Merino wool
Base Installation	SmartSecure System
Stroller Compatibility	UPPAbaby VISTA and CRUZ strollers
Materials	Merino wool