UPPAbaby MESA V2 User Manual

44
CARRIER INSTALLATION WITH VEHICLE SEAT BELT
Lap/Shoulder Optional Routing Method
4
1 Route the lap portion of the seat
belt through both lap belt guides
on the carrier and buckle the seat
belt.
2 Lock vehicle seat belt. See vehicle
owner's instruction book for more
information on locking your seat
belt for child restraint installations.
3 Push the carrier into the vehicle
seat bight (crease of the seat) and
gently apply pressure from behind
the carrier into the vehicle seat
back. At the same time, pull on the
shoulder portion of the vehicle
belt closet to the buckle and hold
tightly.
NOTE: Be mindful of canopy.
1
3
2
WARNING! Vehicle seat belt must lock,
otherwise locking clip must be used. See
page 47 for instructions.

UPPAbaby MESA V2 Specifications

General

Product Type	Infant Car Seat
Weight Capacity	4-35 lbs
Height Capacity	Up to 32 inches
Carrier Weight	9.9 lbs
Base	Included
Side Impact Protection	Yes
Adjustable Headrest	Yes
Height	24 inches
Width	17 inches
Safety Standards	FMVSS 213
Harness	5-point harness
Fabric	Merino wool
Base Installation	SmartSecure System
Stroller Compatibility	UPPAbaby VISTA and CRUZ strollers
Materials	Merino wool