UPPAbaby MESA V2 User Manual

43
CARRIER INSTALLATION WITH VEHICLE SEAT BELT
Lap/Shoulder Belt Preferred Routing Method
3 Lock vehicle seat belt.
NOTE: See vehicle owner's instruction book for
more information on locking your seat belt for
child restraint installations.
4 Push the carrier into the vehicle seat bight
(crease of the seat) and gently apply pressure
from behind the carrier into the vehicle seat
back. At the same time, pull on the shoulder
portion of the vehicle belt closest to the buckle
and hold tightly.
NOTE: Be mindful of canopy.
5 Feed excess webbing into the vehicle retractor.
6 Rotate carry handle forward to the (4th)
rebound position when in use.
NOTE: Check that the carrier is still properly
leveled.
4
4
5
6
3
REVIEW SAFETY CHECK ON PAGE 48.
All steps must be achieved.

UPPAbaby MESA V2 Specifications

General

Product Type	Infant Car Seat
Weight Capacity	4-35 lbs
Height Capacity	Up to 32 inches
Carrier Weight	9.9 lbs
Base	Included
Side Impact Protection	Yes
Adjustable Headrest	Yes
Height	24 inches
Width	17 inches
Safety Standards	FMVSS 213
Harness	5-point harness
Fabric	Merino wool
Base Installation	SmartSecure System
Stroller Compatibility	UPPAbaby VISTA and CRUZ strollers
Materials	Merino wool