UPPAbaby MESA V2 User Manual

Carrier Installation with Vehicle Seat Belt 40
Determining Best Installation Method 40
Leveling the Carrier 41
Lap/Shoulder Belt Preferred Routing Method 42
Lap/Shoulder Belt Optional Routing Method 44
Lap Belt Only Routing Method 46
Installation with Locking Clip 47
Safety Check 48
Aircraft Installation 49
General Use 50
SIP Carriage + Harness Positioning 50
Securing Your Child 51
Infant Insert 53
Attaching Carrier to Base 54
Releasing Carrier from Base 55
Using Canopy 56
Using Carry Handle 57
Important Checks 58
Stroller Compatibility 59
Fitting Carrier to Stroller Frame 59
Releasing Carrier from Stroller Frame 60
Care + Maintenance 61
Cleaning 61
SIP Padding Removal 62
Seat Padding Removal 63
Seat Padding Installation 65
SIP Padding Installation 67
Warranty 68
Read all instructions before use
of this Child Restraint.
Keep these instructions for future reference.
(Storage pocket located on underside of base.)

UPPAbaby MESA V2 Specifications

General

Product Type	Infant Car Seat
Weight Capacity	4-35 lbs
Height Capacity	Up to 32 inches
Carrier Weight	9.9 lbs
Base	Included
Side Impact Protection	Yes
Adjustable Headrest	Yes
Height	24 inches
Width	17 inches
Safety Standards	FMVSS 213
Harness	5-point harness
Fabric	Merino wool
Base Installation	SmartSecure System
Stroller Compatibility	UPPAbaby VISTA and CRUZ strollers
Materials	Merino wool