52
GENERAL USE – Securing Your Child
4 Pull up on the harness to remove excess slack
around the child’s legs.
5 Pull the harness adjuster strap to snugly adjust
the harness straps around your child.
6 Close retainer clip and position at armpit level.
Make sure the shoulder pads don’t interfere
with positioning the chest clip.
HARNESS SHOULD BE SNUG.
Pinch harness webbing at child’s shoulders.
If you can pinch webbing, the harness
is too loose and should be tightened.
For smaller babies, it is recommended
to remove the harness pads for a more
secure fit.
4 5 6
To Next Page
Loading...
