Section 1 - General Information Date Code Identification on Hoses
Service Manual Page 1-5
1-4 D
ATE
C
ODE
I
DENTIFICATION
ON
H
OSES
G
ATES
uses an eight digit code: Plant, Month, Day, Year.
i.e.: XX 01 07 01 - means Plant XX January 07 2001.
P
ARKER
uses a 4 digit code indicating Quarter and Year.
i.e.: 2Q01 - means Second Quarter of 2001.
D
AYCO
stamps month, day and year on each hose.
1-5 S
PECIAL
T
OOLS
The following is a list of special tools which may be required to perform certain maintenance procedures on
the machine.
• 0-69 bar (0-1000 psi) Hydraulic Pressure Gauge with Adapter Fittings
• 0-207 bar (0-3000 psi) Hydraulic Pressure Gauge with Adapter Fittings
• 0-414 bar (0-6000 psi) Hydraulic Pressure Gauge with Adapter Fittings
• Small UpRight Connector Field Kit (UpRight P/N 030899-000)
• Large UpRight Connector Field Kit (UpRight P/N 030898-000)
• Inclinometer (UpRight P/N 010199-000-00)
• MOS90 Calibrator (UpRight P/N 057128-000)
• Optimizer with adapter (UpRight P/N 100329-000)
• Flow Meter Kit (UpRight P/N 067040-000)
• Quadragauge with fitting (UpRight P/N 063971-000)
•0-25 kg (0-50 Lbs.) Chain Tension Scale (UpRight P/N 107078-000)
U
P
R
IGHT
L
IFT
T
OOL
L
IST
• Gland Nut Wrench (UpRight P/N 062521-000)
• Strap Wrench (UpRight P/N 062482-000)
• Tierod Tensioner (2 required) (UpRight P/N 062738-000)
• Tensioner Bracket (2 required) (UpRight P/N 062739-000)
To Next Page
Loading...
Need help?
General
