8
Quick Start
• Enter. Use the Enter key to select the
chosen item. This key is also used to
save a value that has been entered.
This may be a highlighted item or an
entry. If it is not desired to save an entry, use the Exit
key instead.
• Increment and Decrement (Up
and Down). These keys are used
to move up and down. They are
most often used when moving
through the Test Parameters
screen. These keys will also
change digits and characters in the Parameter Editor of
certain menus.
• Next and Previous (Left and
Right). These keys are used to
set parameters. They are most
often used to move along in
menu selections to the desired
entry.
Lockout Keyswitch. Sprint iQ is in Run mode when the
keyswitch is vertical. Turn the keyswitch counter-clockwise to
the horizontal position to enter Program mode. The keyswitch
in illustration below is in the vertical position.
3
To Next Page
Loading...
