Quick Start
15
2.2.7 Status Box Messages
The status box on Sprint iQ’s run display shows information
before, during, and after a test. Three kinds of facts are displayed
in the status box-test type set to run, test phase, and results of the
completed test.
Status Box Messages
These are some of the messages which may display while the
Sprint iQ operates.
Couple X One or more coupling valves have
opened, or a test is in a wait period to
allow an external fixture to activate.
EOC End of cycle.
Fill Product is being filled with air.
Isolate A test is in isolate stage to ensure a valve
is in the correct state before another is
activated.
Pre-Fill Product is being pre-filled with air.
Stabilize The programmed stabilize time is count-
ing down.
Test The test phase is in progress.
Uncouple X One or more coupling valves have
opened, or a test is in a wait period to
allow an external fixture to activate
Vent The test part is open to atmospheric pres-
sure.
To Next Page
Loading...
