Uson sprint iq - Page 39

Menus 37
1. Program Selection
NOTE: Must select a Pressure Decay Rate or Vacuum
Decay Rate program to enable the menu.
2. Leak Compensation
➩ Parameter Editor
Enabled ➜ Disabled
3. Perform Leak Compensation Test
4. Leakrate Format
➩ Parameter Editor
(cycle through decimal formats)
5. Leakrate Units
➩ Parameter Editor
ml/s ➜ ml/m ➜ ml/hr ➜ cc/s ➜ cc/m
6. Leak Master Value
➩ Parameter Editor
00.00 ➜ to 99.99
NOTE: Decimal places available depend on how
Leakrate Format is set.
7. Common Cal Data
8. Channel
9. Perform Comp/Cal Tests
10. Comp. Value
➩ Parameter Editor
00.000 ➜ to 99.999
11. Cal. Value
➩ Parameter Editor
00.000 ➜ to 99.999