Utax 5240L

8-48
Default Setting (System Menu)
Orig.Orientation
Set the original orientation defaults. The available default settings are shown below.
Refer to page 4-6 for Original Orientation.
Use the procedure below to select the default orientation when originals are placed on the platen.
1 In the Sys. Menu/Count. menu, press the U or V key to
select [Common Settings].
2 Press the OK key. The Common Settings menu appears.
3 Press the U or V key to select [Function Default].
4 Press the OK key. The Function Default menu appears.
5 Press the U or V key to select [Orig.Orientation].
6 Press the OK key. Orig.Orientation appears.
7 Press the U or V key to select [c Top Edge Top] or [d
Top Edge Left] .
8 Press the OK key. Completed. is displayed and the
screen returns to the Function Default menu.
Item Description
c Top Edge Top Select the original's top edge at the top.
d Top Edge Left Select the original's top edge at the left.
Sys. Menu/Count.: a b
3 System
4 User/Job Account
*********************
[ Exit ]
5 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language
Function Default: a b
*********************
2 Scan Resolution
3 FAX Resolution
[ Exit ]
1 Color Selection
Orig.Orientation: a b
1 c Top Edge Top
*********************
2 * d Top Edge Left