Utax 5240L

8
8-49
Default Setting (System Menu)
EcoPrint
Select the EcoPrint default. The table below shows the available settings.
NOTE: Refer to page 4-8 for EcoPrint.
Use the procedure below to set the default EcoPrint setting.
1 In the Sys. Menu/Count. menu, press the U or V key to
select [Common Settings].
2 Press the OK key. The Common Settings menu appears.
3 Press the U or V key to select [Function Default].
4 Press the OK key. The Function Default menu appears.
5 Press the U or V key to select [EcoPrint].
6 Press the OK key. EcoPrint appears.
7 Press the U or V key to select [Off] or [On].
8 Press the OK key. Completed. is displayed and the
screen returns to the Function Default menu.
Item Description
Off No EcoPrint performed.
On EcoPrint performed.
Sys. Menu/Count.: a b
3 System
4 User/Job Account
*********************
[ Exit ]
5 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language
Function Default: a b
*********************
2 Scan Resolution
3 FAX Resolution
[ Exit ]
1 Color Selection
EcoPrint: a b
*********************
2 On
1 *Off