Section 5 COPY FUNCTIONS
5-13
6 If there are no more originals, press either the
[Combine/Merge Copy] key or the [OK] key.
The copier will begin copying.
4 in 1 Layout Order
Follow the procedure below to change the order in which pages are
to be laid out within the copied page when making 4 in 1 copies.
1 Depress the [Combine/Merge Copy] key for 3 seconds. The
Default Settings Mode will be displayed.
2 Confirm that the “F28 (4 in 1 layout setting)” is displayed
and then press the [OK] key.
Inch specifications Metric specifications
3 Press either the Zoom (+) key or the Zoom (–) key and select
the layout order from “1-” to “4-”.
The order of the layouts displayed is as below.
IMPORTANT!
When the orientation is “Portrait” (vertical) select 1 or 2;
when it is “Landscape” (horizontal) select 3 or 4.
4 Press the [OK] key.
The display will blink and copying can be begun.
Inch specifications Metric specifications
Setting the Merge Copy Border Lines
Use the procedure given below to change the Merge Copy Border
Lines.
1 Depress the [Combine/Merge Copy] key for 3 seconds. The
Default Settings Mode will be displayed.
1
1
3
4
2
4
2
3
3-:
1-:
1
1
2
4
3
4
3
2
4-:
2-:
To Next Page
Loading...
Need help?
General
