Utax CD 1016 - Outputting the Department Management List; How to Set the Department Management Mode

Section 6 COPIER MANAGEMENT
6-5
5 Press the [OK] key.
The counter will be cleared and the display will return to
that of Step 2.
Outputting the Department
Management List
The Total No. of Copies by section can be output.
1 Display the Department Management Code.
(Refer to P.6-1 "Department Management Code
Operations Procedures".)
Inch specifications Metric specifications
2 Press either the Zoom (+) or Zoom (–) key to display “d05”.
Inch specifications Metric specifications
Note
Check to make sure that 11" × 8 1/2"/A4 size paper is
loaded in the drawer.
3 Press the [OK] key.
The list will be output and the display will return to that of
Step 2.
Inch specifications Metric specifications
Sample: Department Management List
How to set the Department
Management Mode
Set Department Management to enable or disable it.
1 Display the Department Management Code.
(Refer to P.6-1 "Department Management Code
Operations Procedures".)
Inch specifications Metric specifications