Utax CD 1016 - Clearing the Department Management Count

Section 6 COPIER MANAGEMENT
6-4
4 Input the Department Code to be deleted using the Keypad
and then press the [OK] key.
Note
If a mistake is made during input it can be cleared by
pressing the [Stop/Clear] key and the value reentered.
5 Confirm the code to be deleted and then press the [OK] key.
6 Press either the Zoom (+) key or the Zoom (–) key and select
“yes”. To cancel delection, select “no”.
Inch specifications Metric specifications
7 Press the [OK] key.
The display will return to that of Step 2.
Inch specifications Metric specifications
Clearing the Department Management
Count
The Total No. of Copies Count for all sections can be cleared.
1 Display the Department Management Code.
(Refer to P.6-1 "Department Management Code
Operations Procedures".)
Inch specifications Metric specifications
2 Press either the Zoom (+) or Zoom (–) key to display “d04”.
Inch specifications Metric specifications
3 Press the [OK] key.
Inch specifications Metric specifications
4 Press the Zoom (+) key and select “yes”. To cancel the
clearing of the count, select “no”.
Inch specifications Metric specifications