Section 6 COPIER MANAGEMENT
6-12
3 Press the [OK] key. The report will be output.
Inch specifications Metric specifications
Sample: User Status Report
Original Image Quality
Sets the original image quality that will be selected at the time the
copier is turned on.
1 Display the Default Settings Mode.
(Refer to P.6-11 "Default Settings Mode Operations
Procedures".)
Inch specifications Metric specifications
2 Press either the Zoom (+) or Zoom (–) key to display “F02”.
Inch specifications Metric specifications
3 Press the [OK] key.
Inch specifications Metric specifications
4 Press either the Zoom (+) key or the Zoom (–) key and select
“1- (Text + Photos)”, “2- (Photos)” or “3- (Text)”.
Inch specifications Metric specifications
5 Press the [OK] key.
The display will return to that of Step 2.
Inch specifications Metric specifications
To Next Page
Loading...