Utax CD 1016 - Fitting the image of either two or four originals onto a single copy page

Section 5 COPY FUNCTIONS
5-10
The sizes of 2-sheet or 4-sheet originals can be reduced and copied
together onto a single sheet. In addition, the borders of each
original can be separated with a solid or dotted line.
Note
Only regular paper sizes and originals can be used for
this.
2 in 1
2 sheets of originals can be copied onto a single sheet. If used
together with 2-Sided Copy, 4 sheets of originals can be copied onto
both sides of a single sheet.
(Follow the order shown in illustrations 1 → 2 in placing the
originals on the platen.)
The directions for setting the original and the finished copy are as
follows.
<When the original is set on the platen>
Fitting the image of either two or four originals onto a single copy
page
2
1
1
2






Original Copy
Original Setting Direction Finished Product
1

1

1

1
