Section 6 COPIER MANAGEMENT
6-34
The Total Count can be viewed on the Operation Panel. A Counter
Report can also be output.
1 Depress the [Stop/Clear] key for 3 seconds. The Copy Count
will be displayed on the No. of Copies display.
2 The Copy Count will be displayed three times in the
following order. (The example shows a copy count of 1234
copies.)
Note
Pressing on the [Start] key while the Copy Count is
displayed will output the Counter Report. Check to make
sure that 11" × 8
1/2"/A4 paper is available in the drawer
before printing out the Counter Report.
Sample: Counter Report
3 The copier will return to the state where copying can be
continued after the Copy Count has been displayed.
Inch specifications Metric specifications
Checking the Total Counter and Printing Out the Counter Report
1
2 3
To Next Page
Loading...