Section 6 COPIER MANAGEMENT
6-14
4 When Eco-copy is to be used as the initial value press the
Zoom (–) key and select “on” (Enable).
Inch specifications Metric specifications
5 Press the [OK] key.
The display will return to that of Step 2.
Inch specifications Metric specifications
Exposure Steps
Changes the number of steps for the copy’s exposure.
1 Display the Default Settings Mode. (Refer to P.6-11
"Default Settings Mode Operations Procedures".)
Inch specifications Metric specifications
2 Press either the Zoom (+) or Zoom (–) key to display “F05”.
Inch specifications Metric specifications
3 Press the [OK] key.
Inch specifications Metric specifications
4 Press either the Zoom (+) key or the Zoom (–) key and select
either “1- (1 Step)”, or “2- (0.5 Step)”.
Inch specifications Metric specifications
5 Press the [OK] key.
The display will return to that of Step 2.
Inch specifications Metric specifications
Auto Exposure Adjustment
Adjusts the overall exposure of the copy when Auto Exposure Mode
is used.
1 Display the Default Settings Mode. (Refer to P.6-11
"Default Settings Mode Operations Procedures".)
Inch specifications Metric specifications
To Next Page
Loading...