Section 6 COPIER MANAGEMENT
6-17
3 Press the [OK] key.
Inch specifications Metric specifications
4 Press either the Zoom (+) key or the Zoom (–) key and select
an exposure from 1 to 7.
Inch specifications Metric specifications
5 Press the [OK] key.
The display will return to that of Step 2.
Inch specifications Metric specifications
Processing to Reduce Black Line
It is possible to make black line less noticeable when it appears
when using the optional Document Processor. Using processing to
reduce black line decreases the reproduction quality of small
characters, so it is recommended that the copier normally be used
at the factory default setting.
Note
When Photo Mode has been selected in Image Quality
Mode, processing to reduce black line is not possible.
1 Display the Default Settings Mode. (Refer to P.6-11
"Default Settings Mode Operations Procedures".)
Inch specifications Metric specifications
2 Press either the Zoom (+) or Zoom (–) key to display “F10”.
Inch specifications Metric specifications
3 Press the [OK] key.
Inch specifications Metric specifications
4 Press either the Zoom (+) key or the Zoom (–) key and select
“1- (OFF)”, “2- (Weak)” or “3- (Strong)”.
Inch specifications Metric specifications
To Next Page
Loading...