Section 6 COPIER MANAGEMENT
6-19
3 Press the [OK] key.
Inch specifications Metric specifications
4 Press either the Zoom (+) key or the Zoom (–) key and select
a back ground color exposure from 1 to 5.
Inch specifications Metric specifications
5 Press the [OK] key.
The display will return to that of Step 2.
Inch specifications Metric specifications
Drawer Selection
Selects whether the drawer with the same size of paper as the
original size will be automatically selected or whether a selected
drawer level (fixed) is to be used.
1 Display the Default Settings Mode. (Refer to P.6-11
"Default Settings Mode Operations Procedures".)
Inch specifications Metric specifications
2 Press either the Zoom (+) or Zoom (–) key to display “F13”.
Inch specifications Metric specifications
3 Press the [OK] key.
Inch specifications Metric specifications
4 Press either the Zoom (+) key or the Zoom (–) key and select
either “1- (Automatic Paper Selection)”, or “2- (Selected
Drawer)”.
Inch specifications Metric specifications
5 Press the [OK] key.
The display will return to that of Step 2.
Inch specifications Metric specifications
To Next Page
Loading...