Utax P-4030 - Optional Network

8-12
Setup and Registration (System Menu) > System Menu
Restart Network
Optional Network
Basic
System/Network Network Setting Restart Network
Item Description
Restart Network Restarts the network.
NOTE
This function is displayed when the optional Network Interface Kit is installed.
System/Network Optional Network Basic
Item Description
Basic Host Name Check the host name of the machine. Host name can be changed from Embedded Web
Server RX.
Changing Device Information (page 2-42)
TCP/IP Settings For details on setting value, refer to TCP/IP Settings on page 8-8.
Bonjour Select whether to use Bonjour.
Value: Off, On
IPSec Select whether to use IPSec.
Value: Off, On
LAN Interface Select the LAN Interface type.
Value: Auto, 10Base-Half, 10Base-Full, 100Base-Half, 100Base-Full, 1000Base-T
NOTE
This function is displayed when the optional Network Interface Kit is installed.
MACAddressFilter Select whether to use MAC Address Filter.
See the Operation Guide for the optional network interface card for details.
Value: Off, On
Restart Network Restarts the network card of the device.