9-3
User Authentication and Accounting (User Login, Job Accounting) > Enabling User Login Administration
Enabling User Login Administration
This enables user login administration. Select one of the following authentication methods:
1
Display the screen.
1 Press the [System Menu/Counter] key.
2 Press the [ā²] or [ā¼] key to select [User/Job Account], and press the [OK] key.
3 Press the [ā²] or [ā¼] key to select [User Login Set.], and press the [OK] key.
2
Enable user login administration.
1 Press the [ā²] or [ā¼] key to select [User Login], and press the [OK] key.
2 Press the [ā²] or [ā¼] key to select [Local Authentic.] or [Netwk Authentic.], and press the
[OK] key.
Item Descriptions
Local Authentication User authentication based on user properties on the local user list stored in the
machine.
Network Authentication
User authentication based on Authentication Server. Use a user property stored
in Authentication Server to access the network authentication login page.
If the login user name entry screen appears during operations, enter a login user name
and password, and press [Login].
The factory default login user name and login password are set as shown below.
To Next Page
Loading...
Need help?
General
