Utax P-4030 User Manual

2-50
Installing and Setting up the Machine > Embedded Web Server RX
Creating a New Custom Box
You can register a custom box from Embedded Web Server RX.
1
Display the screen.
1 Launch your Web browser.
2 In the address or location bar, enter the machine's IP address or the host name.
Print the status page to check the machine's IP address and the host name. Press the [System
Menu/Counter] key, [Report], [Report Print], [Status Page], and then press [Yes].
3 From the [Document Box] menu, click [Custom Box].
4 Click [Add].
2
Configure the Custom Box.
1 Enter the box details.
Enter the information for the custom box you want to register. For details on the fields to populate,
refer to Embedded Web Server RX User Guide.
2 Click [Submit].
NOTE
To use Custom Box, an optional SSD must be installed in the machine.
Report Report Print Status Page
1
3
2

Utax P-4030 Specifications

General

Brand	Utax
Model	P-4030
Category	Printer
Language	English