9-28
User Authentication and Accounting (User Login, Job Accounting) > Setting an Account
Editing an Account
This changes the registered account information.
1
Display the screen.
1 Press the [System Menu/Counter] key.
2 Press the [ā²] or [ā¼] key to select [User/Job Account], and press the [OK] key.
3 Press the [ā²] or [ā¼] key to select [Job Account.Set.], and press the [OK] key.
4 Press the [ā²] or [ā¼] key to select [Account. List], and press the [OK] key.
2
Change account information.
1 Press the [ā²] or [ā¼] key to select the account you want to change and press the [OK] key.
2 Refer to step 2 of Adding an Account
and Restricting the Use of the Machine to change
account information.
3 Press the [OK] key.
4 Press [Yes] in the registration confirmation screen.
The account information is changed.
If the login user name entry screen appears during operations, enter a login user name
and password, and press [Login].
The factory default login user name and login password are set as shown below.
The account information can be changed by pressing [Menu], selecting [Detail/Edit] and
then pressing the [OK] key.
To Next Page
Loading...
Need help?
General
