Utax P-4030 User Manual

8-25
Setup and Registration (System Menu) > System Menu
Timer Setting
Configure settings related to the time.
Common Settings Timer Setting
Item Description
Timer
Setting
Auto Panel Reset If no jobs are run for a certain period of time, automatically reset settings and return to
the default setting. Select to use Auto Panel Reset or not.
Value: Off, On
NOTE
The time allowed to elapse before the panel is reset is set with the PanelReset Timer on
page 8-25.
PanelReset Timer If you select [On] for Auto Panel Reset, set the amount of time to wait before Auto Panel
Reset.
Value: 5 to 495 seconds (in 5 second increments)
NOTE
This function is displayed when [Auto Panel Reset] is set to [On].
Low Power Timer Set amount of time before entering the Low Power mode.
Value:
For Europe
1 to 120 minutes (1 minute increments)
Except for Europe
1 to 240 minutes (1 minute increments)
Low Power Mode and Auto Low Power Mode (page 2-17)
Sleep Level (models
except for Europe)
Select the Sleep level.
Set the Energy Saver mode to reduce power consumption even more than
Quick
Recovery mode.
Value: Quick Recovery, Energy Saver
NOTE
When the optional Network Interface Kit is installed, this is not displayed.
(Detailed
settings)
Set whether to use the Energy Saver mode for the following functions individually:
•Network
• Card Reader
*1
•FAX
*2
Value: Off, On
NOTE
When the machine enters Energy Saver, the ID card cannot be recognized.
*1 Displayed only when the optional Card Authentication Kit is installed.
*2 Displayed only on products with the fax function installed.

Utax P-4030 Specifications

General

Brand	Utax
Model	P-4030
Category	Printer
Language	English