EasyManuals Logo

Utax P-4035 MFP Service Manual

Utax P-4035 MFP
488 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #248 background imageLoading...
Page #248 background image
2NM/2NX/2NY/2NZ/2P0/2P6
1-4-83
(7) Black or white streaks appear horizontally.
Print example Cause of trouble
1. Dirty developer unit or terminals
2. Flawed or dirty drum unit Improper grounding
3. Dirty transfer roller terminals
Defective part Check description Corrective Action
1
Developer unit
1. Check the print image on
paper has a problem at an
interval equivalent to the cir-
cumference of the develop-
ing roller.
2. Check that the developing
roller is dirty at its ends or at
the developing bias tab.
1. If the ends of the developing roller and the
connecting terminals for developer bias are
dirty, clean.
2. Replace the developer unit. (see page 1-5-
30)
2
Drum unit 1. Check the print image on
paper has a problem at an
interval equivalent to the
circumference of the drum .
Execute drum refreshing.
(System Menu >Adjustment / Maintenance)
2. Check if the drum has
scratches.
Replace the drum unit. (see page 1-5-36)
3. Check the grounding tab of
the drum or the drum drive
shaft.
1. Check how the drive unit is mounted, and
correct, if necessary.
2. Replace the drum unit. (see page 1-5-36)
3
Transfer roller unit
1. Check the print image that
implies dirt, deformation, or
scratches on the transfer
roller, which will be appear-
ing at an interval equal to its
circumference .
If the print image has a problem, clean the
transfer roller by a soft cloth.
2. Check contamination and
deformation on the termi-
nals .
1. If the connecting terminals are deformed,
correct for a proper conduction
2. Replace transfer roller unit.(see page 1-5-
38)
4
Fuser unit Check the print image on paper
has a problem at an interval
equivalent to the circumference
of the fuser roller.
If the print image has a problem, clean the
fuser roller.
5
High voltage PWB The bias voltage output sup-
plied by the high voltage PWB is
not even.
Replace the high voltage PWB. (see page 2-2-
20)

Table of Contents

Other manuals for Utax P-4035 MFP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Utax P-4035 MFP and is the answer not in the manual?

Utax P-4035 MFP Specifications

General IconGeneral
Duplex printingYes
Print technologyLaser
Maximum resolution600 x 600 DPI
Time to first page (black, normal)9 s
Print speed (black, normal quality, A4/US Letter)40 ppm
Duplex print speed (black, normal quality, A4/US Letter)20 ppm
Copier resize25 - 400 %
Maximum number of copies999 copies
Copy speed (black, normal quality, A4)40 cpm
Scan toE-mail, File, Image, USB
Grayscale levels256
Image formats supportedJPG, TIF
Document formats supportedPDF, XPS
FaxingMono faxing
Fax memory8 MB
Modem speed33.6 Kbit/s
Fax coding methodsJBIG, MH, MMR (Fax coding method), MR
Fax resolution (black)200 x 100 DPI
Fax transmission speed3 sec/page
Digital sender-
Printing colorsBlack
Maximum duty cycle- pages per month
Total input capacity500 sheets
Total output capacity250 sheets
Duplex media weight60 - 120 g/m²
Paper tray media typesEnvelopes
Maximum ISO A-series paper sizeA4
Multi-Purpose Tray media weight60 - 220 g/m²
Product colorBlack, Grey
Market positioningBusiness
Wi-FiNo
Cabling technology10/100/1000Base-T(X)
Ethernet LAN data rates10, 100, 1000 Mbit/s
Mobile printing technologiesApple AirPrint
Standard interfacesEthernet, USB 2.0
Memory slots1
Internal memory512 MB
Compatible memory cardsSD
Sound power level (standby)53 dB
AC input voltage220 - 240 V
AC input frequency50 Hz
Power consumption (standby)54.7 W
Power consumption (average operating)680 W
Weight and Dimensions IconWeight and Dimensions
Depth455 mm
Width475 mm
Height575 mm
Weight21500 g

Related product manuals