Utax P-4035 MFP

2NM/2NX/2NY/2NZ/2P0/2P6
1-3-36
U130 Set Toner Install
Description
To set ON/OFF of the toner installation mode.
Purpose
Toner installation is performed at the time of a machine setup.
Setting
1. Press the start key.
2. Select [Mode].
3. Set at On or Off.
4. Press the start key.
Display Description
Mode Setting a toner installation mode.
* : 0:Off / 1:On
* : The toner installation is performed when power is turned on and off.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.