Accordingly, you can now set you diluent in CCR mode as active CCR gas, as well as
all bailout gases as OC ones. In this case, decompression and TTS in CCR mode
shall be calculated based on diluent, and in the case of switch to OC automatically
calculated based on OC gases and will offer the gas from the list of OC gases.
РО
2
field is for reference only and non-editible. It automatically indicates РО
2
at MOD
depth with preset oxygen fraction. It will be offered to save results of editing upon
navigating through all the editible fields.
->Gas Control
Mode is fairly universal. Allows to predict gas consumption during the main or
emergency plan in real time - both in OC mode as well as when changing from CCR to
bailout. Before diving, you must set the parameters of the emergency plan:
additional bottom time (will be added to the current bottom time);
additional level of average depth and the time at this level.
As a rule, the emergency plan is sufficient to indicate to the bottom + 1-2 min. time. In
the current CCR mode emergency plan will be calculated as an immediate change
from CCR to the OC and switching to the list of gases with the status of "OC" or "OC +
To Next Page
Loading...