AV1 Screen in Gauge mode:
5.3.1 Gauge mode Turning On/Off
Gauge mode is turned on/off only in Surface Interval mode.
Otherwise incorrect tissues' saturation probabilty is very high. As a consequence, you
will be under high risk of decompression decease!
5.3.2 Average Depth calculation and Dive Segment Time
Average depth and dive segment time (timer) are calculated during the latest reset (“zero
setting) and the current moment of time. Reset is made with RST button in the Main Menu
and with further confirmation.
IMPORTANT!
Upon diving in Gauge mode, do NOT dive
with AV1 as decompression meter earlier than
48 hours since the last dive in Gauge mode !!!
To Next Page
Loading...