VAC D500 - Page 88

To Next Page

To Previous Page

Manufactur

BB Automation Products GmbH

Process Automation

Schillerstr. 72

32425 Minden

Germany

Tel: +49 571 830-0

Fax: +49 571 830-1806

Customer service center

Tel: +49 180 5 222 580

Mail: automation.service@de.abb.com

Main Page

Table of Contents2
Safety4
General Information and Instructions4
Warnings4
Intended Use5
Improper Use5
Notes on Data Safety5
Warranty Provisions5
Manufacturer's Address5
Use in Potentially Explosive Atmospheres6
Product Identification6
Ex Marking6
Mounting6
Cable Gland6
Operation with Flammable Gases7
Operation in Areas with Combustible Dust7
Operation in Temperature Class T67
ATEX and Iecex Temperature Data7
Type of Protection Ex I, Intrinsic Safety7
Type of Protection Ex N - Non-Sparking7
ATEX und Iecex Electrical Data8
Type of Protection Ex I, Intrinsic Safety8
Basic Device8
Option Modules8
Type of Protection Ex N - Non-Sparking9
Basic Device9
Option Modules9
Use in Potentially Explosive Atmospheres10
Product Identification10
Ex Marking10
Mounting10
Cable Gland10
Operation with Flammable Gases11
Operation in Areas with Combustible Dust11
Operation in Temperature Class T611
Temperature Data11
Electrical Data12
Basic Device12
Option Modules12
Design and Function13
Schematic Diagram13
Principle of Operation14
Product Identification14
Name Plate14
Transport and Storage15
Inspection15
Transporting the Device15
Storing the Device15
Ambient Conditions15
Returning Devices15
Installation15
Safety Instructions15
External Position Sensors16
Mechanical Mounting17
General17
Mounting on Linear Actuators18
Mounting on Control Valves21
Mounting on Rotary Actuator21
Electrical Connections23
Safety Instructions23
Positioner / EDP300 Control Unit Electrical Connection24
EDP300 Remote Sensor Electrical Connection25
Electrical Data for Inputs and Outputs25
Module for Analog Feedback AO26
Module for Digital Feedback SW1, SW226
Module for Universal Input UAI26
Module for the Emergency Shutdown Function27
Limit Switch27
Connection on the Device28
Connection to Device - EDP300 Control Unit with EDP300 Remote Sensor30
Remote Position Sensor32
Installing the Option Modules33
Installing the Mechanical Position Indication33
Installing the Mechanical Position Feedback34
Installing the Pressure Option34
Setting the Mechanical Position Indication34
Setting the Mechanical Limit Switch with Proximity Switches35
Setting the Mechanical Limit Switch with 24 V Microswitches35
Pneumatic Connections36
Information on Double Acting Actuators with Spring- Return Mechanism36
Connection on the Device36
Air Supply37
Commissioning37
Safety Instructions37
Checks Prior to Commissioning37
Mechanical Mounting Checks37
Operation39
Safety Instructions39
Parameterization of the Device39
Menu Navigation39
Menu Levels40
Process Display41
Switching to the Information Level (Operator Menu)41
Switching the Operating Mode42
Start Automatic Adjustment43
Switching to the Configuration Level (Parameterization)44
Selecting and Changing Parameters44
Error Messages on the LCD Display45
Overview of Parameters on the Configuration Level46
Parameter Descriptions50
Menu Easy Setup50
Menu Device Setup52
Menu: Display58
Menu: Controller59
Menu: Input/Output62
Menu: Communication68
Menu: Diagnosis69
Menu: Device Info71
Menu: Service72
Diagnosis / Error Messages74
Calling up the Error Description74
Possible Error Messages75
Maintenance78
Repair78
Returning Devices78
Recycling and Disposal78
Supplemental Specifications79
Actuator Travel79
Housing79
Transmission Data and Contributing Factors79
Seismic Vibration79
Influence of Mounting Orientation79
Noise Emissions79
Ambient Conditions80
Additional Documents80
Accessories80
Extension Modules80
Mounting Material80
Pressure Gauge Block80
PC Adapter for Communication80
Control Program for Operation and Parameterization on a PC80
Appendix81
Return Form81
Control Drawing 90130582

VAC D500 - Page 88

Table of Contents

Related product manuals