Vacon 100 INDUSTRIAL - Mains Voltage 525-690 V

9.1.2 MAINS VOLTAGE 525-690 V
Table 33: The power ratings of VACON
®
100 FLOW in mains voltage 525-690 V, 50-60 Hz, 3~
Enclosure
size
Drive type Loadability Motor shaft power
Continuous
current
I
Lout
[A]
Input
current I
Lin
[A]
10%
overload
current [A]
Max
current I
S
2s
600 V
mains
690 V
mains
10%
overload
40°C [hp]
10%
overload
40°C [kW]
MR8 0080 80.0 90.0 88.0 124.0 75.0 75.0
0100 100.0 106.0 110.0 160.0 100.0 90.0
0125 125.0 127.0 137.5 200.0 125.0 110.0
MR9 0144 144.0 156.0 158.4 250.0 150.0 132.0
0170 170.0 179.0 187.0 288.0 - 160.0
0208 208.0 212.0 228.8 340.0 200.0 200.0
MR10 0261 261.0 272.0 287.1 416.0 250.0 250.0
0325 325.0 330.0 357.5 522.0 300.0 315.0
0385 385.0 386.0 423.5 650.0 400.0 355.0
0416* 416.0 415.0 457.6 770.0 450.0 400.0
MR12 0460 460.0 477.0 506.0 832.0 450.0 450.0
0520 520.0 532.0 572.0 920.0 500.0 500.0
0590 590.0 597.0 649.0 1040.0 600.0 560.0
0650 650.0 653.0 715.0 1180.0 650.0 630.0
0750* 750.0 747.0 825.0 1300.0 700.0 710.0
0820* 820.0 813.0 902.0 1300.0 800.0 800.0
* = These currents are not available when you have both the back channel cooling and du/dt
filter (+CHCB and +PODU).
TECHNICAL DATA, VACON® 100 FLOW VACON · 123
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
9