TABLE OF CONTENTS
Preface
Document details 3
About this manual 3
About the product 3
1 Approvals 7
2 Safety 9
2.1 The safety symbols used in the manual and the drive 9
2.2 Warning 9
2.3 Caution 10
2.4 Grounding and earth fault protection 11
2.5 Using an RCD or an RCM device 12
3 Receiving the delivery 14
3.1 Package label 14
3.2 Type designation code 15
3.3 The contents of the delivery 15
3.4 Storage 15
3.5 Removing the packaging and lifting the AC drive 16
3.5.1 Weight of the AC drive 16
3.5.2 Lifting the AC drive 16
3.6 "Product modified" label 18
3.7 Disposal 19
4 Mounting 20
4.1 Dimensions of the cabinet, IEC 20
4.2 Dimensions of the cabinet with additional cabinet sections, IEC 22
4.3 Dimensions of the cabinet, NAM 27
4.4 Dimensions of the cabinet, with additional cabinet sections, NAM 30
4.5 The options 35
4.6 Installation of the cabinet 43
4.7 Cooling and free space around the AC drive 44
4.8 The optional back channel cooling 46
4.8.1 Using the back channel for cooling 46
5 Power cabling 49
5.1 Cable dimensioning and selection 49
5.1.1 Main circuit diagrams of the cabinet 49
5.1.2 Cable and fuse sizes, IEC 51
5.1.3 Cable and fuse sizes, NAM 58
5.2 Brake resistor cables 64
5.3 Preparing for the cable installation 66
5.4 Cable installation in MR8-MR12 67
5.4.1 Installing the cables 70
TABLE OF CONTENTS VACON · 5
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
To Next Page
Loading...
