2 SAFETY
2.1 THE SAFETY SYMBOLS USED IN THE MANUAL AND THE DRIVE
This manual contains warnings and cautions, which are identified with safety symbols. The
warnings and cautions give important information on how to prevent injury and damage to
the equipment or your system.
Read the warnings and cautions carefully and obey their instructions.
Table 1: The safety symbols
The safety symbol The safety word Description
WARNING!
If you do not obey the
instructions, injury or
death is possible.
CAUTION!
If you do not obey the
instructions, damage to
the equipment is possible.
HOT SURFACE!
If you do not obey the
instructions, burns are
possible.
READ THE MANUAL!
You must read the man-
ual.
WAIT 5 MINUTES! You must wait 5 minutes.
2.2 WARNING
WARNING!
Do not touch the components of the power unit when the drive is connected to
mains. The components are live when the drive is connected to mains. A contact
with this voltage is very dangerous.
SAFETY VACON · 9
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
2
To Next Page
Loading...
