Vacon 100 INDUSTRIAL - The EMC Jumper in MR9

4 Find the grounding arm and push it down.
A
B
A. The grounding arm is up
B. The grounding arm is down
(level C3)
5 After the change, write "The EMC level was
changed" and the date on the "product changed"
label. If the label is not attached at this time, attach
it on the drive near the name plate.
Product modified
Date:
Date:
Date:
7.6.2 THE EMC JUMPER IN MR9
Change the EMC protection of the AC drive from level C3 to level C4.
THE EMC JUMPER 1
1 Open the covers of the AC drive.
VACON · 88 COMMISSIONING AND ADDITIONAL INSTRUCTIONS
7
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/