CAUTION!
To divide the weight of the AC drive
equally, and to prevent damage to the
equipment, always use 4 lifting holes.
4 The minimum angle between the drive and the
chain is 60 degrees.
5 Lift the drive into a vertical position.
3.6 "PRODUCT MODIFIED" LABEL
In the accessories bag, there is also a "product modified" label. The function of the label is to
tell the service personnel about the changes that are made in the AC drive. Attach the label
on the side of the AC drive to know where to find it. If you make changes in the AC drive, write
the change on the label.
Product modified
Date:
Date:
Date:
VACON · 18 RECEIVING THE DELIVERY
3
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
To Next Page
Loading...
