4.5 THE OPTIONS
Table 6: The options and their codes
Group Name Code
Auxiliary equipment Motor heater control +CAMH
Cabinet heater +CACH
Cabinet light +CACL
Cabinet power supply for accesso-
ries
Auxiliary voltage transformer +CAPT
Auxiliary AC supply terminals +CAPU
24 VDC power supply +CAPD
AC customer socket +CAPS
Door-mounted options Signal lights and reset button +CDLP
Control terminals Extended I/O terminals +CTID
Protection devices STO with emergency stop push button on door +CPS0
SS1 with emergency stop push button on door +CPS1
Emergency switch off +CPSB
Insulation monitoring +CPIF
Input devices AC fuses and fuse switch +CIFD
Input contactor +CICO *
Dynamic braking Brake chopper +DBIN
Output filters Common mode filter +POCM
du/dt filter +PODU
Sine filter +COSI
Cabling options Input cabling from top +CHIT
Output cabling from top +CHOT
Cabling from top +CHCT
Base plinth options Base plinth 200 mm +CHPH
Cooling options Back channel cooling +CHCB
Enclosure IP 54 +IP54
Special construction Marine construction +EMAR *
MOUNTING VACON · 35
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
4
To Next Page
Loading...
