Fig. 5: The dimensions of the default cabinet, MR12, [mm], IEC
4.2 DIMENSIONS OF THE CABINET WITH ADDITIONAL CABINET SECTIONS, IEC
IEC = The product is qualified to the IEC criteria.
NAM = The product is qualified to the UL criteria.
The information on dimensions that you will need in cabling can be found in the order-
specific documents.
Table 5: The width of the additional cabinet section [mm]
Enclosure size With the input
contactor (+CICO)
With +CHIT, +CHOT,
or +CHCT *
With +CICO and
+CHIT, +CHOT, or
+CHCT *
With the sine filter
(+COSI)
MR8 - 400 400 600
MR9 - 400 400 600
MR10, max 385 A - 400 400 600
MR10, min 416 A 600 400 600 600
MR12 600 600 600 2 x 600
* = Input cabling from top (+CHIT), output cabling from top (+CHOT), or cabling from top
(+CHCT)
VACON · 22 MOUNTING
4
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
To Next Page
Loading...
