CAUTION!
If you use long air ducts in addition to the duct adapter flanges, use a duct fan or
equivalent to prevent back pressure. Back pressure must be prevented because it
decreases the performance of the drive.
NOTE!
The height of the standard base plinth is 100 mm, but the height of the base plinth
option (+CHPH) is 200 mm.
Fig. 26: Dimensions for the back channel cooling, MR8
MOUNTING VACON · 47
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
4
To Next Page
Loading...
