Fig. 37: The inside layout of MR10, without protective covers
A. The output air grill
B. The control connector of the power unit
C. The EMC jumper (behind the covers)
D. The main switch option and the fuses
E. The mains cable terminals
F. The 360-degree grounding
G. The PE bar
H. Input air grill
I. The terminals for the option +CAPU
J. The motor cable terminals
K. The service lid, and the main fan under it
L. The cable entry plate for control cables
POWER CABLING VACON · 69
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
5
To Next Page
Loading...
