Vacon 100 INDUSTRIAL - Page 73

10 If you use many cables on one connector, put the
cable lugs on top of each other.
•
The pictures show the connection in MR10 and
MR12.
•
The bolt holder of the connector keeps the bolt
still when you turn the nut.
A
B
C
1. 2.
3.
4.
D
A. The bolt holder of the
connector
B. The first cable lug
C. The connector
D. The second cable lug
E
A
C
B
D
F
A. The bolt holder of the
connector
B. The first cable lug
C. The connector
D. The second cable lug
E. The connection bush
F. The third cable lug
POWER CABLING VACON · 73
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
5